DOUBLE SUCTION VENTILATORS- DIRECT DRIVE CBM/6-10/10 T
DOUBLE SUCTION VENTILATORS- DIRECT DRIVE CBM/6-10/10 T
SKU:
N/A
Categories: FRAME AXIAL FANS, AXIAL CYLINDRICAL VENTILATORS, VENTILATION-VENTILATION
Tags: Industrial Press, fans
Description
DOUBLE SUCTION VENTILATORS- DIRECT DRIVE CBM/6-10/10 T
230V/50Hz
- Double suction with dense sirocco impeller
- IP20 open type motor, Class F.
- Enclosed T-type motor IP44, Class F All types have thermal protection.
APPLICATIONS: Suitable for multiple ventilation applications, installation in air boilers, air conditioning units etc.
Curves and dimensions at <Technical Data> on the back pages of the catalogue
REGULATION: With REB-E 5000C.
- T= Enclosed motor IP44, class F.
- /4= 4 motor poles (1400 rpm), /6=6 pole motor (900 rpm)
- (10)= Static pressure indicator. Where there is this indication of static, the cubics listed are according to this static. The static pressure, calculated in mm WG (millimeters of water column)
| INCHES FENDER | TYPE | POWER
|
DELIVERY m3/h | DIMENSIONS. F/S mm (L x W x H) |
| 270/270 | CBM/6-10/10 T |
|
4.700(3) | 575 x 575 x 575 |
Product Catalog
TECHNICAL BROCHURE MANUAL
Related products
Agitator Fan | Eliturbo series
STIR FAN
ELITURBO SERIES
Open the brochure
ELITURBO-User-Manual
- Special type fan with Impresind's patented propeller design.
- Its construction is perfectly harmonized with safety and hygiene rules.
- The differentiation of ELITURBO is that it stirs the air circularly and distributes it evenly throughout the space.
- In winter, uniform distribution of warm air throughout the space results in energy savings for heating up to 30%.
- In the summer, the stirring of the air noticeably improves the microclimate of the room without the need to open doors and windows.
Ceiling fan | Artic-R series
ΑΝΕΜΙΣΤΗΡΕΣ ΟΡΟΦΗΣ
ΣΕΙΡΑ ARTIC-R
Open the brochure
ARTIC-R-MANUAL
- Axial fan with a suitable base for mounting on the ceiling.
- Uniform distribution of air in the space thanks to the rotation 360The.
- Motor 230V 50Hz.
- With wall switch 3 gears.
- It is recommended to install at a height of up to 2.30m.
Axial Fans | HDT-HDB series
EXPLOSIVE EXPLOSIVE TYPES VENTILATORS
HDT-HDB SERIES
Open the brochure
- With motor 400V explosive type EEXDIIB T5 the EExdIIC T4.
- 1400rpm.
- Motor protection IP55.
- Category F.
- Impeller made of die-cast aluminum.
- With a dense strong protection grid.
- Models with motors are also available on request 6 and 8 poles.
- The models 315 and 355 are also available at 220V.
- Suitable for electronic automation roofs, batteries, transformers, engine rooms, chemical laboratories, explosive atmospheres.
- Setting with INVERTER.
Axial Fans | PBB-PBT 230V series
AXLE CYLINDER VENTILATORS PORTABLE DIMENSIONS
PBB-PBT SERIES
Axial cylindrical fans with sturdy support base for easy transport and portability.
Open the brochure
- PBB with 230V motor.
- PBT with 400V motor.
- With high motor protection IP65.
- Category F for air temperature -40°C to +70°C.
- With thermal protection.
- Reinforced impeller PVC.
- Designed to achieve high air supply.
- Suitable for commercial and industrial use.
- Set to 230V with REB-5000W and in 400V with INVERTER.
Axial Fans | TJFT / TJFU / TJHT series
AXIAL PROMOTION VENTILATORS
TJFT SERIES
1 SPEED, 2 ΠΟΛΩΝ
Open the brochure
- Cylindrical air ventilation fans - jet fans.
- For air transfer from -20 °C up to + 40 °C.
- Three-phase motor 400V one or two speeds.
- Motor protection IP55. Category F.
- Exterior terminal.
- Axial aluminum impeller.
- Type TJHT with endurance motor 400°C for 2 hours (F400-120).
- Case made of hot-dip galvanized steel.
- The air inlet and outlet cylinders are suitably soundproofed in the form of a sound trap.
- Suitable for fast air advance in closed or underground parking lots, tunnels, tunnel.
- Also suitable as fume hoods.
- ON REQUIREMENT: - With motor 2 gears 2/4 poles. - With 400 ° end motorC/2h, class F (TJHT). - With air direction blinds.
Axial Fans | TJFT / TJFU / TJHT series
AXIAL PROMOTION VENTILATORS
TJFU SERIES
1 SPEED, 2 ΠΟΛΩΝ, F-400-120
Open the brochure
- Cylindrical air ventilation fans - jet fans.
- For air transfer from -20 °C up to + 40 °C.
- Three-phase motor 400V one or two speeds.
- Motor protection IP55. Category F.
- Exterior terminal.
- Axial aluminum impeller.
- Type TJHT with endurance motor 400°C for 2 hours (F400-120).
- Case made of hot-dip galvanized steel.
- The air inlet and outlet cylinders are suitably soundproofed in the form of a sound trap.
- Suitable for fast air advance in closed or underground parking lots, tunnels, tunnel.
- Also suitable as fume hoods.
- ON REQUIREMENT: - With motor 2 gears 2/4 poles. - With 400 ° end motorC/2h, class F (TJHT). - With air direction blinds.
Axial Fans | TTT series
AXLE CYLINDRICAL VENTILATORS BELT MOVED
TTT SERIES
Open the brochure
- Axial cylindrical air duct fans.
- Indirect movement through belts and pulleys.
- Motor 400V with protection IP55, Category F.
- With thermal protection.
- With an easy adjustment wreath with the airway.
- Aluminum impeller coated with epoxy polyester paint.
- Easy maintenance, motor cleaning or replacement is done without disassembling the ventilator from the air duct.
- Suitable for exhaust corrosive and explosive gases, temperature up to 120°C.
- Ability to adjust speed with INVERTER.
Centrifugal | IFHT Series Ventilators
CENTRAL PROMOTION VENTILATORS
IFHT SERIES
Open the brochure
- Induction fans that cause air to move in closed car parks.
- IFHT: certified for F300-120 (300TheC for 120') according to the norm EN12101-3.
- Galvanized steel sheet housing with 2 mounts.
- With protection grid.
- External terminal for easy connection.
- Motor: Three phase, F300-120, IP55. Category H..
- Low profile suitable for installation in low height areas.

