MEITAV-TEC METER ANALYZER HVAC ANEMOMETER & R 6-IN-1 TOOL
MEITAV-TEC METER ANALYZER HVAC ANEMOMETER & R 6-IN-1 TOOL.
MEASURE HER TEMPERATURE,HER HUMIDITY,HIM AIR FLOW VOLUME , PERFORMANCE IN KW,BTU/H ,THE DEW POINT AND WIND SPEED…
| Manufacturers |
|---|
Description
MEITAV-TEC METER ANALYZER HVAC ANEMOMETER & R 6-IN-1 TOOL
MEITAV-TEC'S M-4000MD ,IT'S A REVOLUTIONARY TOOL THAT EVERY HVAC PROFESSIONAL IN THE HVAC FIELD MUST HAVE & R.
THIS INSTRUMENT ,IT IS PERFECT FOR CHECKS ,SYSTEMS EVALUATIONS ,MAINTENANCE BUT ALSO FOR ANY OTHER WORK THAT REQUIRE RELIABLE MEASUREMENTS .
THE DIAGNOSTIC INSTRUMENT FOR MEASURING AIR CONDITIONING SYSTEMS,VENTILATION AND EXHAUST COVERS A WIDE RANGE OF APPLICATIONS.
ALLOWING YOU TO MAKE MEASUREMENTS FOR SINGLE OR MULTIPLE AIR OUTLETS , IN PARALLEL AND ROUND AIR DUCT.
THE METER CAN MEASURE IT TEMPERATURE,HER HUMIDITY,HIM AIR FLOW VOLUME , THE PERFORMANCE OF THE AIR CONDITIONER IN KW ,THE DEW POINT AND WIND SPEED….
ALL AT THE PUSH OF A BUTTON !!!
THE HVAC ANALYST , M4000MD BY MEITAV-TEC , IT CONSISTS OF TWO PIECES ,THE CONTROL UNIT, WHICH INCLUDES A LARGE LCD SCREEN (19.8 x 9 x 4 cm) WITH IMAGING MEASUREMENT ACTIONS AND A HAND MULTI-SENSOR CONNECTED BETWEEN THEM BY A SPIRAL CABLE .
THE MULTI-SENSOR INCLUDES EVERYTHING NEEDED FOR THE MULTIPLE MEASUREMENTS IT CAN PERFORM
MEITAV-TEC'S M4000MD MEASURES ALL HVAC INLET AND OUTLET VARIABLES, ALLOWING AN INTELLIGENT ANALYSIS OF SYSTEM PERFORMANCE.
SIMPLE OPERATION LISTING THE ACTIONS TO PERFORM EACH MEASUREMENT GUIDE THE USER TO THE NEXT STEP TO COMPLETE THE MEASUREMENT.
• TEMPERATURE MEASUREMENT (° C / ° F).
"VANE" TYPE SPEED SENSOR (F73) WITH LOW FRICTION BEARINGS ,AIRSPEED RANGE FROM 0.3 UP TO 15m/sec (1-49 ft/sec) ACCURATELY +/-3%, A NUMBER AND ANALYSIS 0.1 m/sec (0.2 ft/sec).THE NTC thermistor SENSOR MEASURES TEMPERATURE IN °F & °C (23°F to 149°F & -5°C to 65°C) ACCURACY +/-1°C (+/-2°F) AND ANALYSIS 0.6°C.
• MOISTURE MEASUREMENT (% RH).
HUMIDITY SENSOR ,ELECTRONIC ,WITH EUROS 10 UP TO 95%Rh, ACCURACY +/-3%Rh AND RESOLUTION 0.4%Rh
• MEASURES THE DEW POINT (° C / ° F).
• MEASURES WIND SPEED (FPS) AND THE AIR VOLUME (CFM).
• MEASURES AIR CONDITIONER EFFICIENCY IN BTU / HR.
• INSTANT READING - NO ADDITIONAL CALCULATIONS REQUIRED.
• ALLOWS THE MEASUREMENT OF RECTANGULAR AND ROUND AIR DUCTS. IT ALSO PERFORMS MEASUREMENTS IN SYSTEMS WITH MULTIPLE OUTLETS WORKING AUTOMATICALLY.
• HANDLING IS DONE WITH 3 JUST KEYBOARD BUTTONS COMBINATING BETWEEN THEM ,ALL OPERATIONS ARE ALLOWED AND RESULTS READ.
• THE INSTRUMENT HAS AUDIO AND VISUAL MESSAGES.
• MEMORY RETAINS CUMULATIVE VOLUME MEASUREMENTS (CFM) AND POWER (BTU / HR).
• ILLUSTRATES MEASUREMENTS IN METRIC UNITS IMPERIAL.
• HANDY AND LIGHTWEIGHT ONLY 260gr).
• LOW BATTERY INDICATION.
• OPERATION WITH 9V BATTERY.
MEITAV-TEC'S ANALYST NOT INCLUDES CARRY CASE.
A PRODUCT THAT COMES AT A VERY COMPETITIVE PRICE MAKING THE M4000MD THE TOP MEASURING INSTRUMENT ON THE GREEK AND WORLD MARKET.
COMMERCIAL BROCHURE
INSTRUCTIONS FOR USE M4000MD
Related products
Ceiling fan | Artic-R series
ΑΝΕΜΙΣΤΗΡΕΣ ΟΡΟΦΗΣ
ΣΕΙΡΑ ARTIC-R
Open the brochure
ARTIC-R-MANUAL
- Axial fan with a suitable base for mounting on the ceiling.
- Uniform distribution of air in the space thanks to the rotation 360The.
- Motor 230V 50Hz.
- With wall switch 3 gears.
- It is recommended to install at a height of up to 2.30m.
Open the brochure
ARTIC-R-MANUAL 
Axial Fans | KAF Series Single Phase
AXIAL FANS
KAF SINGLE PHASE SERIES
- 4-wing aluminum impeller (6-wing on the KAF-602).
- With motor 220V & 380V.
- 1400 rpm
- With thermal protection.
- Diameters from Φ250mm to Φ600mm.
- With protective grid.
Axial Fans | KAF Series Three phase
AXIAL FANS
KAF THREE PHASE SERIES
- 4-wing aluminum impeller (6-wing on the KAF-602).
- With motor 220V & 380V.
- 1400 rpm
- With thermal protection.
- Diameters from Φ250mm to Φ600mm.
- With protective grid.
Axial Fans | HDT-HDB series
EXPLOSIVE EXPLOSIVE TYPES VENTILATORS
HDT-HDB SERIES
Open the brochure
- With motor 400V explosive type EEXDIIB T5 the EExdIIC T4.
- 1400rpm.
- Motor protection IP55.
- Category F.
- Impeller made of die-cast aluminum.
- With a dense strong protection grid.
- Models with motors are also available on request 6 and 8 poles.
- The models 315 and 355 are also available at 220V.
- Suitable for electronic automation roofs, batteries, transformers, engine rooms, chemical laboratories, explosive atmospheres.
- Setting with INVERTER.
Open the brochure 
Axial Fans | TBT series
HIGH PRESSURE CYLINDER CYLINDER VENTILATORS
TBT SERIES
Open the brochure
- Large manometric height.
- Suitable for ventilation of industrial and storage areas.
- Category F. Three-phase motor IP55.
- One pressure aluminum impeller.
- Ability to adjust speed.
Open the brochure 
Axial Ventilators | TGT-THGT 230V series
AXLE CYLINDRICAL VENTILATORS VEHICLE VARIABLE
TGT-THGT SERIES 230V
Open the brochure
EN_THGT
- Axial fans with variable inclination impeller made of aluminum.
- Three-phase motor 400V, 50Hz.
- Motor protection IP55, Category F.
- Extremely robust all-aluminum construction.
- Suitable for special applications of high requirements, underground parking, shopping malls, public buildings.
- Type THBIT with endurance motor 400°C the first 2 hours and 200°C subsequently.
- Upon request with motor 2 gears, 2, 4, 6, the 8 poles or explosion-proof motors.
- Guy LC has a wide body.
- Setting with INVERTER.
Open the brochure
EN_THGT 
Ventilators | HXM Series
INDUSTRIAL AND HOUSEHOLD VENTILERS
Open the brochure
HXM SERIES
- With 220V motor.
- Motor protection IP40 and IP20.
- 1400rpm.
- Category B for air temperature up to +40oC.
- Suitable for cafes, restaurants, kitchens etc..
- Possibility of variation with dimmer REB-5000W and REB-2.5.
Open the brochure 
