AUX AHRV-1500/5 AUX AIR 1500 m3/h ERV 380V
AUX AHRV-1500/5 AUX AIR 1500 m3/h ERV 380V
Is widely used in high -rise buildings, hotels, office buildings, hospitals, shopping malls and banks, residential buildings and other places
Manufacturers |
---|
AUX AHRV-1500/5 AUX AIR 1500 m3/h ERV 380V
AUX's total heat exchanger is energy -saving equipment used to recover the air of air export air. Such a device does not require the main air conditioner to provide source of cold and heat, but heat exchanger through immediate air recovery in the air conditioner room.
Thus, is the standard energy -saving and environmentally friendly configuration, healthy buildings and an ideal partner of air conditioning. It consists mainly of a body of shell, Heat Core and Filters and other accessories. This device works by following the principle that through the material with heat and heat transmission in the core of the heat exchanger, Using exhaust air for pre -frozen and drying of fresh air in summer and warm -up and moisture fresh air in winter, so that the new fresh air load can be reduced significantly and thus save energy consumption and operating costs of the heating and cooling system.
Electricity consumption will also be reduced.
Such device is widely used in high -rise buildings, hotels, office buildings, hospitals, shopping malls and banks, residential buildings and other places
AUX's innovative centrifugal fan provides more air volume but lower noise, making the supply of air quieter and smoothly.
Related products
Agitator Fan | Eliturbo series
- Special type fan with Impresind's patented propeller design.
- Its construction is perfectly harmonized with safety and hygiene rules.
- The differentiation of ELITURBO is that it stirs the air circularly and distributes it evenly throughout the space.
- In winter, uniform distribution of warm air throughout the space results in energy savings for heating up to 30%.
- In the summer, the stirring of the air noticeably improves the microclimate of the room without the need to open doors and windows.


Axial Fans | KAF Series Single Phase
- 4-wing aluminum impeller (6-wing on the KAF-602).
- With motor 220V & 380V.
- 1400 rpm
- With thermal protection.
- Diameters from Φ250mm to Φ600mm.
- With protective grid.
Axial Fans | HIT series
- Indirect movement through trapezoidal belts and pulleys.
- With automatic metal blind.
- Motor protection IP55.
- Category F.
- Suitable for greenhouses, dryers, farms, sports venues and club.

Axial Fans | TBT series
- Large manometric height.
- Suitable for ventilation of industrial and storage areas.
- Category F. Three-phase motor IP55.
- One pressure aluminum impeller.
- Ability to adjust speed.

Axial Fans | TJFT / TJFU / TJHT series
- Cylindrical air ventilation fans - jet fans.
- For air transfer from -20 °C up to + 40 °C.
- Three-phase motor 400V one or two speeds.
- Motor protection IP55. Category F.
- Exterior terminal.
- Axial aluminum impeller.
- Type TJHT with endurance motor 400°C for 2 hours (F400-120).
- Case made of hot-dip galvanized steel.
- The air inlet and outlet cylinders are suitably soundproofed in the form of a sound trap.
- Suitable for fast air advance in closed or underground parking lots, tunnels, tunnel.
- Also suitable as fume hoods.
- ON REQUIREMENT: - With motor 2 gears 2/4 poles. - With 400 ° end motorC/2h, class F (TJHT). - With air direction blinds.

Axial Fans | TTT series
- Axial cylindrical air duct fans.
- Indirect movement through belts and pulleys.
- Motor 400V with protection IP55, Category F.
- With thermal protection.
- With an easy adjustment wreath with the airway.
- Aluminum impeller coated with epoxy polyester paint.
- Easy maintenance, motor cleaning or replacement is done without disassembling the ventilator from the air duct.
- Suitable for exhaust corrosive and explosive gases, temperature up to 120°C.
- Ability to adjust speed with INVERTER.

Centrifugal | IFHT Series Ventilators
- Induction fans that cause air to move in closed car parks.
- IFHT: certified for F300-120 (300TheC for 120 ') according to the norm EN12101-3.
- Galvanized steel sheet housing with 2 mounts.
- With protection grid.
- External terminal for easy connection.
- Motor: Three phase, F300-120, IP55. Category H..
- Low profile suitable for installation in low height areas.
