AIR BOX FOR CBM VENTILATORS, CBP BOX-100
AIR BOX FOR CBM VENTILATORS, CBP BOX-100
Description
AIR BOX FOR CBM VENTILATORS, CBP BOX-100
Unassembled without fan
Assembled. Walls (caps) from reinforced galvanized steel sheet coated, with internal insulation of 1cm foam sound-absorbing material,"tied" with aluminum profiles and plastic triangular corners (exclusive construction). A suitable opening is provided on the air outlet side. Inside the airbox you place the double or single suction ventilator, based on special anti-vibration supports, for more rigid construction and neutralization of vibrations.
- The air box is delivered unassembled and packed in a cardboard box.
ON REQUIREMENT: Any special construction is possible such as:
Curve (neck) at the exit for protection against rain or rain spout, insect screen, sockets on the suction side, additional reinforced sandwich-type internal heat-sound insulation, with perforated inner casing and various types of insulation.
| TYPE | FOR CBM VENTILATOR, CBP PER WING DIAMETER ( inches) | AIR BOX DIMENSIONS mm |
| BOX-100 | 15/15,18/18 | 1000 x 1000 x 1000 |
Product Catalog
TECHNICAL BROCHURE MANUAL
Related products
Agitator Fan | Eliturbo series
STIR FAN
ELITURBO SERIES
Open the brochure
ELITURBO-User-Manual
- Special type fan with Impresind's patented propeller design.
- Its construction is perfectly harmonized with safety and hygiene rules.
- The differentiation of ELITURBO is that it stirs the air circularly and distributes it evenly throughout the space.
- In winter, uniform distribution of warm air throughout the space results in energy savings for heating up to 30%.
- In the summer, the stirring of the air noticeably improves the microclimate of the room without the need to open doors and windows.
Open the brochure
ELITURBO-User-Manual 
Axial Fans | KAF Series Three phase
AXIAL FANS
KAF THREE PHASE SERIES
- 4-wing aluminum impeller (6-wing on the KAF-602).
- With motor 220V & 380V.
- 1400 rpm
- With thermal protection.
- Diameters from Φ250mm to Φ600mm.
- With protective grid.
Axial Fans | CGT-CHGT series
IN-BOX VARIABLE VENDOR AXIAL FANS
CGT-CHGT SERIES
Open the brochure
Open the CHGT commercial brochure
- Axial fans within a square frame.
- Aluminum variable pitch impeller 3, 6 and 9 fins.
- Three-phase motor 400V, 50Hz.
- Motor protection IP55, Category F.
- Extremely robust all-aluminum construction.
- Suitable for special applications of high requirements, underground parking, shopping malls, public buildings.
- Type CHGT with endurance motor 400oC the first 2 hours and 200oC subsequently.
- Upon request with motor 2 gears, 2, 4, 6, the 8 poles or explosion-proof motors.
- Setting with INVERTER.
Open the brochure
Open the CHGT commercial brochure 
Axial Fans | HDT-HDB series
EXPLOSIVE EXPLOSIVE TYPES VENTILATORS
HDT-HDB SERIES
Open the brochure
- With motor 400V explosive type EEXDIIB T5 the EExdIIC T4.
- 1400rpm.
- Motor protection IP55.
- Category F.
- Impeller made of die-cast aluminum.
- With a dense strong protection grid.
- Models with motors are also available on request 6 and 8 poles.
- The models 315 and 355 are also available at 220V.
- Suitable for electronic automation roofs, batteries, transformers, engine rooms, chemical laboratories, explosive atmospheres.
- Setting with INVERTER.
Open the brochure 
Axial Ventilators | TGT-THGT 400V series
AXLE CYLINDRICAL VENTILATORS VEHICLE VARIABLE
TGT-THGT 400V SERIES
Open the brochure
EN_THGT
- Axial fans with variable inclination impeller made of aluminum.
- Three-phase motor 400V, 50Hz.
- Motor protection IP55, Category F.
- Extremely robust all-aluminum construction.
- Suitable for special applications of high requirements, underground parking, shopping malls, public buildings.
- Type THBIT with endurance motor 400°C the first 2 hours and 200°C subsequently.
- Upon request with motor 2 gears, 2, 4, 6, the 8 poles or explosion-proof motors.
- Guy LC has a wide body.
- Setting with INVERTER.
Open the brochure
EN_THGT 
Axial Fans | TJFT / TJFU / TJHT series
AXIAL PROMOTION VENTILATORS
TJFU SERIES
1 SPEED, 2 ΠΟΛΩΝ, F-400-120
Open the brochure
- Cylindrical air ventilation fans - jet fans.
- For air transfer from -20 °C up to + 40 °C.
- Three-phase motor 400V one or two speeds.
- Motor protection IP55. Category F.
- Exterior terminal.
- Axial aluminum impeller.
- Type TJHT with endurance motor 400°C for 2 hours (F400-120).
- Case made of hot-dip galvanized steel.
- The air inlet and outlet cylinders are suitably soundproofed in the form of a sound trap.
- Suitable for fast air advance in closed or underground parking lots, tunnels, tunnel.
- Also suitable as fume hoods.
- ON REQUIREMENT: - With motor 2 gears 2/4 poles. - With 400 ° end motorC/2h, class F (TJHT). - With air direction blinds.
Open the brochure 
Axial Fans|Compact Three Phase Series
THREE PHASE COMPACT SERIES (380V)
The unique design of the ventilator succeeds maximum performance with extremely small thickness thus occupying the smallest possible installation space. Still, the special design of the frame ensures low weight combined with maximum performance.- With high motor protection. IP65.
- Category F for air temperatures from -40oC to +70oC.
- Suitable for industrial spaces, pigsties, poultry farms, greenhouses, dryers, warehouses etc..
- Possibility of variation with dimmer REB-5000W and inversion with dimmer REB-1R.
Open the brochure 
Portable Fans | Turbo Series
PORTABLE FANS
TURBO SERIES
Open the brochure
- Large portable floor fans Φ350mm & Φ450mm, high efficiency and low noise level.
- Metallics entirely painted with epoxy paint.
- Aerodynamic design aluminum impeller.
- Single phase motor (220V).
- Maximum flow 2.880m3/h.
- Suitable for ventilation / cooling in homes, workplaces, offices, motor cooling, for ovens or paint dryers. ® With its guarantee Soler & Palau Spain
Open the brochure 
