RS-133X52 CENTRIFUGAL ABSORBER WINGS
RS-133X52 CENTRIFUGAL ABSORBER WINGS
Description
RS-133X52 CENTRIFUGAL ABSORBER WINGS
WINGS OF CENTRIFUGAL ABSORBERS FKS-FKSG
RS series
- Plovers with dense, forward-sloping fins.
APPLICATIONS: Suitable for FKS series single suction hoods
| DIMENSIONS DIAMETER x WIDTH 0mm | SHAFT DIAMETER 0mm |
| RS-133X52 | 11 |
Product Catalog
Related products
Agitator Fan | Eliturbo series
STIR FAN
ELITURBO SERIES
Open the brochure
ELITURBO-User-Manual
- Special type fan with Impresind's patented propeller design.
- Its construction is perfectly harmonized with safety and hygiene rules.
- The differentiation of ELITURBO is that it stirs the air circularly and distributes it evenly throughout the space.
- In winter, uniform distribution of warm air throughout the space results in energy savings for heating up to 30%.
- In the summer, the stirring of the air noticeably improves the microclimate of the room without the need to open doors and windows.
Open the brochure
ELITURBO-User-Manual 
Ceiling fan | Artic-R series
ΑΝΕΜΙΣΤΗΡΕΣ ΟΡΟΦΗΣ
ΣΕΙΡΑ ARTIC-R
Open the brochure
ARTIC-R-MANUAL
- Axial fan with a suitable base for mounting on the ceiling.
- Uniform distribution of air in the space thanks to the rotation 360The.
- Motor 230V 50Hz.
- With wall switch 3 gears.
- It is recommended to install at a height of up to 2.30m.
Open the brochure
ARTIC-R-MANUAL 
Axial Fans | KAF Series Single Phase
AXIAL FANS
KAF SINGLE PHASE SERIES
- 4-wing aluminum impeller (6-wing on the KAF-602).
- With motor 220V & 380V.
- 1400 rpm
- With thermal protection.
- Diameters from Φ250mm to Φ600mm.
- With protective grid.
Axial Fans | KAF Series Three phase
AXIAL FANS
KAF THREE PHASE SERIES
- 4-wing aluminum impeller (6-wing on the KAF-602).
- With motor 220V & 380V.
- 1400 rpm
- With thermal protection.
- Diameters from Φ250mm to Φ600mm.
- With protective grid.
Axial Fans | HDT-HDB series
EXPLOSIVE EXPLOSIVE TYPES VENTILATORS
HDT-HDB SERIES
Open the brochure
- With motor 400V explosive type EEXDIIB T5 the EExdIIC T4.
- 1400rpm.
- Motor protection IP55.
- Category F.
- Impeller made of die-cast aluminum.
- With a dense strong protection grid.
- Models with motors are also available on request 6 and 8 poles.
- The models 315 and 355 are also available at 220V.
- Suitable for electronic automation roofs, batteries, transformers, engine rooms, chemical laboratories, explosive atmospheres.
- Setting with INVERTER.
Open the brochure 
Axial Fans | PBB-PBT 400V series
AXLE CYLINDER VENTILATORS PORTABLE DIMENSIONS
PBB-PBT SERIES
Axial cylindrical fans with sturdy support base for easy transport and portability.
Open the brochure
- PBB with 230V motor.
- PBT with 400V motor.
- With high motor protection IP65.
- Category F for air temperature -40°C to +70°C.
- With thermal protection.
- Reinforced impeller PVC.
- Designed to achieve high air supply.
- Suitable for commercial and industrial use.
- Set to 230V with REB-5000W and in 400V with INVERTER.
Open the brochure 
Axial Fans | TBT series
HIGH PRESSURE CYLINDER CYLINDER VENTILATORS
TBT SERIES
Open the brochure
- Large manometric height.
- Suitable for ventilation of industrial and storage areas.
- Category F. Three-phase motor IP55.
- One pressure aluminum impeller.
- Ability to adjust speed.
Open the brochure 
Axial Fans | TTT series
AXLE CYLINDRICAL VENTILATORS BELT MOVED
TTT SERIES
Open the brochure
- Axial cylindrical air duct fans.
- Indirect movement through belts and pulleys.
- Motor 400V with protection IP55, Category F.
- With thermal protection.
- With an easy adjustment wreath with the airway.
- Aluminum impeller coated with epoxy polyester paint.
- Easy maintenance, motor cleaning or replacement is done without disassembling the ventilator from the air duct.
- Suitable for exhaust corrosive and explosive gases, temperature up to 120°C.
- Ability to adjust speed with INVERTER.
Open the brochure 
