CEILING VENTILATORS HGHT-V/4-1250-9/-22
CEILING VENTILATORS HGHT-V/4-1250-9/-22
Description
CEILING VENTILATORS HGHT-V/4-1250-9/-22
- Series of axial flow ceiling fans, with the vertical air discharge configuration, for air extraction.
- Designed to extract smoke in fire conditions and certified F400-120 and F300-120 (HGHT-V-CE marking).
- Housing formed from steel roll welded to the base with a corrosion resistant galvanized finish.
- Premium cast aluminum blades locked into a hub of pressed steel sheets.
- Rear shutter and exit with safety in exhaust fans.
- Cylindrical casing formed from steel roll protected from corrosion by gray polyester paint coating.
HGHT-V engines:
- F400 120 three-phase motor 4 poles 400V 50Hz, IP55, class H insulation.
- F300 120 three-phase motor 4 poles 400V 50Hz, IP55, class H insulation.
- Electrical insulation placed in the fan housing.
- Three-phase 230/400V-50Hz up to 3 KW.
- Three-phase 400V-50Hz, for higher horsepower and two-speed engines (See chart features).
additional information:
- Standard wind direction: Form A) Configuration (motor above the impeller).
Upon request:
- Engines 6 poles.
- Engines 2 gears 4/6 and 4/8 poles.
| TYPE | DIAMETER(0 mm) | POWER (W) | CURRENT (A) | WEIGHT(kg) |
| HGHT-V/4-1250-9/-22 | 1250 | 22 | 41 | 523 |
Product Catalog
TECHNICAL BROCHURE MANUAL
Related products
Agitator Fan | Eliturbo series
STIR FAN
ELITURBO SERIES
Open the brochure
ELITURBO-User-Manual
- Special type fan with Impresind's patented propeller design.
- Its construction is perfectly harmonized with safety and hygiene rules.
- The differentiation of ELITURBO is that it stirs the air circularly and distributes it evenly throughout the space.
- In winter, uniform distribution of warm air throughout the space results in energy savings for heating up to 30%.
- In the summer, the stirring of the air noticeably improves the microclimate of the room without the need to open doors and windows.
Open the brochure
ELITURBO-User-Manual 
Axial Fans | CGT-CHGT series
IN-BOX VARIABLE VENDOR AXIAL FANS
CGT-CHGT SERIES
Open the brochure
Open the CHGT commercial brochure
- Axial fans within a square frame.
- Aluminum variable pitch impeller 3, 6 and 9 fins.
- Three-phase motor 400V, 50Hz.
- Motor protection IP55, Category F.
- Extremely robust all-aluminum construction.
- Suitable for special applications of high requirements, underground parking, shopping malls, public buildings.
- Type CHGT with endurance motor 400oC the first 2 hours and 200oC subsequently.
- Upon request with motor 2 gears, 2, 4, 6, the 8 poles or explosion-proof motors.
- Setting with INVERTER.
Open the brochure
Open the CHGT commercial brochure 
Axial Fans | Compact 230V series
AXIAL CYLINDER VENTILATORS
COMPACT TCF-TCB SERIES
The unique design of the ventilator succeeds maximum performance with extremely small thickness thus occupying the smallest possible installation space.
Still, the special design of the frame ensures low weight combined with maximum performance.
Open the brochure
EN_TCBB-TCBT
- TCFB with 230V motor.
- TCFT with 400V motor.
- TCF with impeller made of reinforced PVC.
- TCB with reinforced aluminum impeller.
- With high motor protection IP65.
- Category F for air temperatures from -40o C to +70o C.
- Suitable for industrial spaces, pigsties, poultry farms, greenhouses, dryers, warehouses etc..
- Set to 230V with dimmer REB-5000W and invert with REB-1R.
- Set to 400V with INVERTER.
Open the brochure
EN_TCBB-TCBT 
Axial Fans | HDT-HDB series
EXPLOSIVE EXPLOSIVE TYPES VENTILATORS
HDT-HDB SERIES
Open the brochure
- With motor 400V explosive type EEXDIIB T5 the EExdIIC T4.
- 1400rpm.
- Motor protection IP55.
- Category F.
- Impeller made of die-cast aluminum.
- With a dense strong protection grid.
- Models with motors are also available on request 6 and 8 poles.
- The models 315 and 355 are also available at 220V.
- Suitable for electronic automation roofs, batteries, transformers, engine rooms, chemical laboratories, explosive atmospheres.
- Setting with INVERTER.
Open the brochure 
Axial Ventilators | TGT-THGT 400V series
AXLE CYLINDRICAL VENTILATORS VEHICLE VARIABLE
TGT-THGT 400V SERIES
Open the brochure
EN_THGT
- Axial fans with variable inclination impeller made of aluminum.
- Three-phase motor 400V, 50Hz.
- Motor protection IP55, Category F.
- Extremely robust all-aluminum construction.
- Suitable for special applications of high requirements, underground parking, shopping malls, public buildings.
- Type THBIT with endurance motor 400°C the first 2 hours and 200°C subsequently.
- Upon request with motor 2 gears, 2, 4, 6, the 8 poles or explosion-proof motors.
- Guy LC has a wide body.
- Setting with INVERTER.
Open the brochure
EN_THGT 
Axial Fans|Compact Single Phase Series
COMPACT SERIES SINGLE PHASE (220V)
The unique design of the ventilator succeeds maximum performance with extremely small thickness thus occupying the smallest possible installation space. Still, the special design of the frame ensures low weight combined with maximum performance.- With high motor protection. IP65.
- Category F for air temperatures from -40oC to +70oC.
- Suitable for industrial spaces, pigsties, poultry farms, greenhouses, dryers, warehouses etc..
- Possibility of variation with dimmer REB-5000W and inversion with dimmer REB-1R.
Open the brochure
Axial Fans|Compact Three Phase Series
THREE PHASE COMPACT SERIES (380V)
The unique design of the ventilator succeeds maximum performance with extremely small thickness thus occupying the smallest possible installation space. Still, the special design of the frame ensures low weight combined with maximum performance.- With high motor protection. IP65.
- Category F for air temperatures from -40oC to +70oC.
- Suitable for industrial spaces, pigsties, poultry farms, greenhouses, dryers, warehouses etc..
- Possibility of variation with dimmer REB-5000W and inversion with dimmer REB-1R.
Open the brochure 
