CENTRIFUGAL TYPE CEILING VENTILATORS CRHB/4-500-N
CENTRIFUGAL TYPE CEILING VENTILATORS CRHB/4-500-N
Description
CENTRIFUGAL TYPE CEILING VENTILATORS CRHB/4-500-N
- Motor 230V-50/60Hz or 230/400-50/60Hz external rotor.
- Low height horizontal hood centrifugal ceiling fans.
- Motor protection IP54, Category F with thermal protection.
- With built-in switch ON/OFF.
- With rear wing.
APPLICATIONS: Suitable for central ventilation of shops and industrial facilities, warehouses, parking etc.
ON REQUIREMENT: With motor 2 gears.
CRHB= 230V-50/60Hz
CRHT= 400V-50/60Hz
| TYPE | VOLTAGE V-Hz | REVOLUTIONS rpm | MAXIMUM POWER W | CURRENT (A) | MAXIMUM DELIVERY m3/h | NOISE LEVEL dB(A)
|
DIAMETER
0mm |
OPERATING TEMPERATURE °C | WEIGHT
kg |
| CRHB/4-500-N | 230-50 | 1410 | 1588 | 6,6 | 8.770 |
|
407 | -40/+40 | 60 |
Product Catalog
TECHNICAL BROCHURE MANUAL
Related products
Agitator Fan | Eliturbo series
STIR FAN
ELITURBO SERIES
Open the brochure
ELITURBO-User-Manual
- Special type fan with Impresind's patented propeller design.
- Its construction is perfectly harmonized with safety and hygiene rules.
- The differentiation of ELITURBO is that it stirs the air circularly and distributes it evenly throughout the space.
- In winter, uniform distribution of warm air throughout the space results in energy savings for heating up to 30%.
- In the summer, the stirring of the air noticeably improves the microclimate of the room without the need to open doors and windows.
Open the brochure
ELITURBO-User-Manual 
Ceiling fan | Artic-R series
ΑΝΕΜΙΣΤΗΡΕΣ ΟΡΟΦΗΣ
ΣΕΙΡΑ ARTIC-R
Open the brochure
ARTIC-R-MANUAL
- Axial fan with a suitable base for mounting on the ceiling.
- Uniform distribution of air in the space thanks to the rotation 360The.
- Motor 230V 50Hz.
- With wall switch 3 gears.
- It is recommended to install at a height of up to 2.30m.
Open the brochure
ARTIC-R-MANUAL 
Axial Fans | KAF Series Single Phase
AXIAL FANS
KAF SINGLE PHASE SERIES
- 4-wing aluminum impeller (6-wing on the KAF-602).
- With motor 220V & 380V.
- 1400 rpm
- With thermal protection.
- Diameters from Φ250mm to Φ600mm.
- With protective grid.
Axial Fans | KAF Series Three phase
AXIAL FANS
KAF THREE PHASE SERIES
- 4-wing aluminum impeller (6-wing on the KAF-602).
- With motor 220V & 380V.
- 1400 rpm
- With thermal protection.
- Diameters from Φ250mm to Φ600mm.
- With protective grid.
Axial Fans | TBT series
HIGH PRESSURE CYLINDER CYLINDER VENTILATORS
TBT SERIES
Open the brochure
- Large manometric height.
- Suitable for ventilation of industrial and storage areas.
- Category F. Three-phase motor IP55.
- One pressure aluminum impeller.
- Ability to adjust speed.
Open the brochure 
Axial Fans | TJFT / TJFU / TJHT series
AXIAL PROMOTION VENTILATORS
TJFU SERIES
1 SPEED, 2 ΠΟΛΩΝ, F-400-120
Open the brochure
- Cylindrical air ventilation fans - jet fans.
- For air transfer from -20 °C up to + 40 °C.
- Three-phase motor 400V one or two speeds.
- Motor protection IP55. Category F.
- Exterior terminal.
- Axial aluminum impeller.
- Type TJHT with endurance motor 400°C for 2 hours (F400-120).
- Case made of hot-dip galvanized steel.
- The air inlet and outlet cylinders are suitably soundproofed in the form of a sound trap.
- Suitable for fast air advance in closed or underground parking lots, tunnels, tunnel.
- Also suitable as fume hoods.
- ON REQUIREMENT: - With motor 2 gears 2/4 poles. - With 400 ° end motorC/2h, class F (TJHT). - With air direction blinds.
Open the brochure 
Centrifugal | IFHT Series Ventilators
CENTRAL PROMOTION VENTILATORS
IFHT SERIES
Open the brochure
- Induction fans that cause air to move in closed car parks.
- IFHT: certified for F300-120 (300TheC for 120') according to the norm EN12101-3.
- Galvanized steel sheet housing with 2 mounts.
- With protection grid.
- External terminal for easy connection.
- Motor: Three phase, F300-120, IP55. Category H..
- Low profile suitable for installation in low height areas.
Open the brochure 
