CENTRIFUGAL TYPE CEILING VENTILATORS 400°C/2h CTVT/6-630H
CENTRIFUGAL TYPE CEILING VENTILATORS 400°C/2h CTVT/6-630H
Description
CENTRIFUGAL TYPE CEILING VENTILATORS 400°C/2h CTVT/6-630H
- With motor 220V the 380V 4,6,the 8, poles.
- With rear impeller made of galvanized steel sheet dynamically balanced.
- High efficiency motor with 400 ° enduranceC the 2 first hours and 200 °C subsequently.
- Exhaust air vertically upwards so as not to cause nuisance and pollution around the ventilator.
- Suitable for industrial use as well as gas extraction from professional kitchens, especially those located within residential areas and causing inconvenience to neighbors.
| TYPE | TURNS
rpm |
POWER
W |
CURRENT A
230V 400V |
DELIVERY
m3/h |
NOISE LEVEL dB(A)
|
DIA. HAT 0mm | DIAMETER 0mm | FRAME BASE DIMENSION(0mm) | WEIGHT kg |
| CTVT/6-630H | 970 | 5.500 |
|
24.540 |
|
710 | 1332 | 1100×1100 | 215 |
Product Catalog
TECHNICAL BROCHURE MANUAL
Related products
Axial Fans | KAF Series Single Phase
AXIAL FANS
KAF SINGLE PHASE SERIES
- 4-wing aluminum impeller (6-wing on the KAF-602).
- With motor 220V & 380V.
- 1400 rpm
- With thermal protection.
- Diameters from Φ250mm to Φ600mm.
- With protective grid.
Axial Fans | CGT-CHGT series
IN-BOX VARIABLE VENDOR AXIAL FANS
CGT-CHGT SERIES
Open the brochure
Open the CHGT commercial brochure
- Axial fans within a square frame.
- Aluminum variable pitch impeller 3, 6 and 9 fins.
- Three-phase motor 400V, 50Hz.
- Motor protection IP55, Category F.
- Extremely robust all-aluminum construction.
- Suitable for special applications of high requirements, underground parking, shopping malls, public buildings.
- Type CHGT with endurance motor 400oC the first 2 hours and 200oC subsequently.
- Upon request with motor 2 gears, 2, 4, 6, the 8 poles or explosion-proof motors.
- Setting with INVERTER.
Open the brochure
Open the CHGT commercial brochure 
Axial Fans | HDT-HDB series
EXPLOSIVE EXPLOSIVE TYPES VENTILATORS
HDT-HDB SERIES
Open the brochure
- With motor 400V explosive type EEXDIIB T5 the EExdIIC T4.
- 1400rpm.
- Motor protection IP55.
- Category F.
- Impeller made of die-cast aluminum.
- With a dense strong protection grid.
- Models with motors are also available on request 6 and 8 poles.
- The models 315 and 355 are also available at 220V.
- Suitable for electronic automation roofs, batteries, transformers, engine rooms, chemical laboratories, explosive atmospheres.
- Setting with INVERTER.
Open the brochure 
Axial Ventilators | TGT-THGT 400V series
AXLE CYLINDRICAL VENTILATORS VEHICLE VARIABLE
TGT-THGT 400V SERIES
Open the brochure
EN_THGT
- Axial fans with variable inclination impeller made of aluminum.
- Three-phase motor 400V, 50Hz.
- Motor protection IP55, Category F.
- Extremely robust all-aluminum construction.
- Suitable for special applications of high requirements, underground parking, shopping malls, public buildings.
- Type THBIT with endurance motor 400°C the first 2 hours and 200°C subsequently.
- Upon request with motor 2 gears, 2, 4, 6, the 8 poles or explosion-proof motors.
- Guy LC has a wide body.
- Setting with INVERTER.
Open the brochure
EN_THGT 
Axial Fans | TJFT / TJFU / TJHT series
AXIAL PROMOTION VENTILATORS
TJFT SERIES
2 SPEEDS, 2/4 ΠΟΛΩΝ
Open the brochure
- Cylindrical air ventilation fans - jet fans.
- For air transfer from -20 °C up to + 40 °C.
- Three-phase motor 400V one or two speeds.
- Motor protection IP55. Category F.
- Exterior terminal.
- Axial aluminum impeller.
- Type TJHT with endurance motor 400°C for 2 hours (F400-120).
- Case made of hot-dip galvanized steel.
- The air inlet and outlet cylinders are suitably soundproofed in the form of a sound trap.
- Suitable for fast air advance in closed or underground parking lots, tunnels, tunnel.
- Also suitable as fume hoods.
- ON REQUIREMENT: - With motor 2 gears 2/4 poles. - With 400 ° end motorC/2h, class F (TJHT). - With air direction blinds.
Open the brochure
Axial Fans | TJFT / TJFU / TJHT series
AXIAL PROMOTION VENTILATORS
TJFU SERIES
2 SPEEDS, 2/4 ΠΟΛΩΝ, F-400-120
Open the brochure
- Cylindrical air ventilation fans - jet fans.
- For air transfer from -20 °C up to + 40 °C.
- Three-phase motor 400V one or two speeds.
- Motor protection IP55. Category F.
- Exterior terminal.
- Axial aluminum impeller.
- Type TJHT with endurance motor 400°C for 2 hours (F400-120).
- Case made of hot-dip galvanized steel.
- The air inlet and outlet cylinders are suitably soundproofed in the form of a sound trap.
- Suitable for fast air advance in closed or underground parking lots, tunnels, tunnel.
- Also suitable as fume hoods.
- ON REQUIREMENT: - With motor 2 gears 2/4 poles. - With 400 ° end motorC/2h, class F (TJHT). - With air direction blinds.
Open the brochure 
Axial Fans | TTT series
AXLE CYLINDRICAL VENTILATORS BELT MOVED
TTT SERIES
Open the brochure
- Axial cylindrical air duct fans.
- Indirect movement through belts and pulleys.
- Motor 400V with protection IP55, Category F.
- With thermal protection.
- With an easy adjustment wreath with the airway.
- Aluminum impeller coated with epoxy polyester paint.
- Easy maintenance, motor cleaning or replacement is done without disassembling the ventilator from the air duct.
- Suitable for exhaust corrosive and explosive gases, temperature up to 120°C.
- Ability to adjust speed with INVERTER.
Open the brochure 
Centrifugal | IFHT Series Ventilators
CENTRAL PROMOTION VENTILATORS
IFHT SERIES
Open the brochure
- Induction fans that cause air to move in closed car parks.
- IFHT: certified for F300-120 (300TheC for 120') according to the norm EN12101-3.
- Galvanized steel sheet housing with 2 mounts.
- With protection grid.
- External terminal for easy connection.
- Motor: Three phase, F300-120, IP55. Category H..
- Low profile suitable for installation in low height areas.
Open the brochure 
