MOUTH T1P 1 SERIES OF MOVABLE WINGS
MOUTH T1P 1 SERIES OF MOVABLE WINGS
SELECT THE DIMENSIONS FROM THE ATTACHED FILE AND THE TYPE YOU WANT
Categories: VENTILATION-VENTILATION, MOUTHS-BLINDS
Description
MOUTH T1P 1 SERIES OF MOVABLE WINGS
Anodized aluminum wall inlet. With a row of adjustable fins, parallel to the first mentioned dimension. Electrostatic painting in RAL color is possible. It is used in heating and cooling applications.
Also available in the following versions:
- T1P-D: With aluminum damper with at the same time, counter-rotating vanes.
- T1P-E: Visitable.
- T1P-FA: With air filter.
- T1P-D-E: Visitable with aluminum damper at the same time, counter-rotating vanes.
- T1P-D-FA: With aluminum damper with at the same time, counter-rotating vanes and air filter.
- T1P-E-FA: Visitable with air filter.
- T1P-D-E-FA: Visitable with air filter and aluminum damper with at the same time, counter-rotating vanes.
- Τ1Π-AUTH: Winged on a subframe whose angle, hence the direction of the wind, is automatically adjusted according to the air supply temperature. Maximum dimension 600X300mm.
- Τ1Π-ON/OFF-220V: Winged on a subframe whose angle, hence the direction of the wind, regulated by means of an on/off 220V electric motor. Maximum dimension 600X300mm.
- Τ1Π-ANALOGUE-24V: Winged on a subframe whose angle, hence the direction of the wind, regulated via a 24V analog electric motor. Maximum dimension 600x300mm.
- T1P-IN304: Made of stainless steel 304. Maximum dimension 1200X1000mm. For a width greater than 600mm there is a 25mm width support in the middle, the fins are divided into 2 places.
- Τ1Π-SR: For installation directly in a circular air duct. With galvanized steel sheet frame.
- Τ1Π-SR-D: For installation directly in a circular air duct and with an aluminum damper at the same time, counter-rotating vanes. With galvanized steel sheet frame
- T1P-SR-DK: For installation directly in a circular air duct and with a clapper-type damper made of galvanized sheet steel. With galvanized steel sheet frame.
The mouths T1P/T1P-D/T1P-FA/T1P-D-FA they can be placed on a metal plate (-SPQ) mineral fiber dimensions (external dimensions 595X595mm). In this case the plate and the mouth are electrostatically painted in RAL color. This is only possible for nominal orifice dimensions: 100X100, 125X125, 150X150, 200X200, 250X250, 300X300, 350X350, 400X400, 450X450 and 500X500.
TECHNICAL PRODUCT SHEET
Related products
Axial Fans | Compact 230V series
AXIAL CYLINDER VENTILATORS
COMPACT TCF-TCB SERIES
The unique design of the ventilator succeeds maximum performance with extremely small thickness thus occupying the smallest possible installation space.
Still, the special design of the frame ensures low weight combined with maximum performance.
Open the brochure
EN_TCBB-TCBT
- TCFB with 230V motor.
- TCFT with 400V motor.
- TCF with impeller made of reinforced PVC.
- TCB with reinforced aluminum impeller.
- With high motor protection IP65.
- Category F for air temperatures from -40o C to +70o C.
- Suitable for industrial spaces, pigsties, poultry farms, greenhouses, dryers, warehouses etc..
- Set to 230V with dimmer REB-5000W and invert with REB-1R.
- Set to 400V with INVERTER.
Axial Fans | HIT series
AXLE BELT VENTILATORS
HIT SERIES
HIT Three-phase version (380V).
Open the brochure
- Indirect movement through trapezoidal belts and pulleys.
- With automatic metal blind.
- Motor protection IP55.
- Category F.
- Suitable for greenhouses, dryers, farms, sports venues and club.
Axial Fans | PBB-PBT 400V series
AXLE CYLINDER VENTILATORS PORTABLE DIMENSIONS
PBB-PBT SERIES
Axial cylindrical fans with sturdy support base for easy transport and portability.
Open the brochure
- PBB with 230V motor.
- PBT with 400V motor.
- With high motor protection IP65.
- Category F for air temperature -40°C to +70°C.
- With thermal protection.
- Reinforced impeller PVC.
- Designed to achieve high air supply.
- Suitable for commercial and industrial use.
- Set to 230V with REB-5000W and in 400V with INVERTER.
Axial Fans | TJFT / TJFU / TJHT series
AXIAL PROMOTION VENTILATORS
TJFT SERIES
1 SPEED, 2 ΠΟΛΩΝ
Open the brochure
- Cylindrical air ventilation fans - jet fans.
- For air transfer from -20 °C up to + 40 °C.
- Three-phase motor 400V one or two speeds.
- Motor protection IP55. Category F.
- Exterior terminal.
- Axial aluminum impeller.
- Type TJHT with endurance motor 400°C for 2 hours (F400-120).
- Case made of hot-dip galvanized steel.
- The air inlet and outlet cylinders are suitably soundproofed in the form of a sound trap.
- Suitable for fast air advance in closed or underground parking lots, tunnels, tunnel.
- Also suitable as fume hoods.
- ON REQUIREMENT: - With motor 2 gears 2/4 poles. - With 400 ° end motorC/2h, class F (TJHT). - With air direction blinds.
Axial Fans | TTT series
AXLE CYLINDRICAL VENTILATORS BELT MOVED
TTT SERIES
Open the brochure
- Axial cylindrical air duct fans.
- Indirect movement through belts and pulleys.
- Motor 400V with protection IP55, Category F.
- With thermal protection.
- With an easy adjustment wreath with the airway.
- Aluminum impeller coated with epoxy polyester paint.
- Easy maintenance, motor cleaning or replacement is done without disassembling the ventilator from the air duct.
- Suitable for exhaust corrosive and explosive gases, temperature up to 120°C.
- Ability to adjust speed with INVERTER.
Axial Fans|Compact Three Phase Series
THREE PHASE COMPACT SERIES (380V)
The unique design of the ventilator succeeds maximum performance with extremely small thickness thus occupying the smallest possible installation space. Still, the special design of the frame ensures low weight combined with maximum performance.- With high motor protection. IP65.
- Category F for air temperatures from -40oC to +70oC.
- Suitable for industrial spaces, pigsties, poultry farms, greenhouses, dryers, warehouses etc..
- Possibility of variation with dimmer REB-5000W and inversion with dimmer REB-1R.
Ventilators | HXBR Series
EXTERIOR ROTOR EXTERIOR VENTILATORS
HXB SERIESR-HXTR
The unique design of the ventilator achieves maximum efficiency with extremely small thickness resulting in occupying the smallest possible installation space. Also the special design of the frame ensures low weight combined with maximum performance.
Open the brochure
- The only ones in Europe with motor protection IP65.
- Category F for air temperatures from -40oC to +70oC.
- Suitable for industrial spaces, pigsties, poultry farms, greenhouses, dryers, warehouses etc..
- Possibility of variation with dimmer REB-5000W and inversion with dimmer REB-1R.
